The application together with the configuration of the FPGA is loaded upon power-up from the flash device. What must be done using this method?
cmd /C C:\Xilinx\SDK\2019.1\bin\program_flash -f MyProject\App.ExternalFlash.mcs -offset 0 -flash_type qspi-x4-single -fsbl M:\EUser\JCC\org.deepjava.trglib\rsc\FSBL.elf -cable type xilinx_tcf url TCP:127.0.0.1:3121
Make sure that the programming was successful with the program printing
Flash Operation Successful