deep

a Cross Development Platform for Java

User Tools

Site Tools

You are here: start » firstexample » boot_loader
firstexample:boot_loader

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
firstexample:boot_loader [2025/02/18 13:01] – [Flashing a new Boot Loader] ursgraffirstexample:boot_loader [2025/02/18 13:02] (current) – [Flashing a new Boot Loader] ursgraf
Line 15: Line 15:
   - Switch the driver for your JTAG-HS3 adapter to //FTDI CDM//, see [[https://wiki.ost.ch/display/EDS/Digilent+JTAG-HS3]]. IMPORTANT: You must close OpenOCD before switching the driver, else the //WinUSB// cannot be unloaded.   - Switch the driver for your JTAG-HS3 adapter to //FTDI CDM//, see [[https://wiki.ost.ch/display/EDS/Digilent+JTAG-HS3]]. IMPORTANT: You must close OpenOCD before switching the driver, else the //WinUSB// cannot be unloaded.
   - The program to download can be found in the binaries of //Vivado// or //Xilinx Vitis//. You have to either install //Vivado// or //Vitis// which doesn't require a license. As //Vivado// uses lots of disk space we strongly recommend to install //Vitis//. For the installation see [[https://wiki.ost.ch/pages/viewpage.action?pageId=346161189|Installing Xilinx SDK]]. After installation, open a command shell and run the command (Change the command so that the right configuration file is loaded, see [[https://wiki.ost.ch/display/EDS/MicroZed+Boardhttps://wiki.ost.ch/display/EDS/MicroZed+Board]]). The corresponding files can be found in your target runtime library in the directory ///rsc//. Please make sure that the paths in the following command does not include spaces! <code shell>cmd /C C:\Xilinx\Vitis\2020.2\bin\program_flash -f \\ost.ch\dfs\bsc.sys\public-programme\deep\lib\rsc\BOOTflink2.mcs -offset 0 -flash_type qspi-x4-single -fsbl \\ost.ch\dfs\bsc.sys\public-programme\deep\lib\rsc\FSBL.elf -cable type xilinx_tcf url TCP:127.0.0.1:3121</code> Make sure that the programming was successful with the program printing <code>Flash Operation Successful</code>   - The program to download can be found in the binaries of //Vivado// or //Xilinx Vitis//. You have to either install //Vivado// or //Vitis// which doesn't require a license. As //Vivado// uses lots of disk space we strongly recommend to install //Vitis//. For the installation see [[https://wiki.ost.ch/pages/viewpage.action?pageId=346161189|Installing Xilinx SDK]]. After installation, open a command shell and run the command (Change the command so that the right configuration file is loaded, see [[https://wiki.ost.ch/display/EDS/MicroZed+Boardhttps://wiki.ost.ch/display/EDS/MicroZed+Board]]). The corresponding files can be found in your target runtime library in the directory ///rsc//. Please make sure that the paths in the following command does not include spaces! <code shell>cmd /C C:\Xilinx\Vitis\2020.2\bin\program_flash -f \\ost.ch\dfs\bsc.sys\public-programme\deep\lib\rsc\BOOTflink2.mcs -offset 0 -flash_type qspi-x4-single -fsbl \\ost.ch\dfs\bsc.sys\public-programme\deep\lib\rsc\FSBL.elf -cable type xilinx_tcf url TCP:127.0.0.1:3121</code> Make sure that the programming was successful with the program printing <code>Flash Operation Successful</code>
-  - Switch the driver for the JTAG-HS3 back to //WinUSB//, see [[https://wiki.bu.ost.ch/infoportal/embedded_systems/jtaghs3/start]].+  - Switch the driver for the JTAG-HS3 back to //WinUSB//, see [[https://wiki.ost.ch/display/EDS/Digilent+JTAG-HS3]].
firstexample/boot_loader.1739880116.txt.gz · Last modified: 2025/02/18 13:01 by ursgraf

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki