Differences

This shows you the differences between two versions of the page.

--- openocd:starting_openocd [2018/08/20 17:33] – created mgehrig2
+++ openocd:starting_openocd [2020/09/18 13:53] – ursgraf
@@ Line 1: / Line 1: @@
 ====== Starting OpenOCD ======
-OpenOCD requires the correct configuration files. The files for the Zybo board can be downloaded {{ :openocd:openocd_config.zip |here}}. Both files must be copied to the ''/openocd-0.10.0/bin-x64/'' folder.
+Navigate to your ''openocd-0.10.0'' directory.
+  * On the Zybo board start ''startOpenocdZybo.bat''
+  * On the Microzed board start ''startOpenocdMicrozed.bat''
-OpenOCD can then be started in a shell with ''openocd -f zybo-ftdi.cfg -f zybo.cfg''.
+With a telnet connection on localhost:4444 the command line interface of OpenOCD can be opened. The Eclipse plugin //OpenOCDinterface// also uses this port.
-After startup the shell of OpenOCD is blocked.
-With a telnet connection on localhost:4444 the command line interface of OpenOCD can be opened. The Eclipse plugin OpenOCD interface also uses this port.
 The gdb connects over port 3333.

deep