Differences

This shows you the differences between two versions of the page.

--- firstexample:first_example_microzed_deploy [2021/07/23 18:47] – [Step by Step Instructions] ursgraf
+++ firstexample:first_example_microzed_deploy [2021/12/28 14:54] – [Deploying] ursgraf
@@ Line 1: / Line 1: @@
 ====== Deploying ======
 <box green 100%>
-As soon as you are done with your development, you can deploy it. This means to program it together with a FPGA configuration into the on-board flash device.
+As soon as you are done with your development, you can deploy it. This means to load it together with a FPGA configuration onto a SD card. Alternatively, you can program it into the on-board flash device.
 </box>
-The application together with the configuration of the FPGA is loaded upon power-up from the flash device. What must be done using this method?
+The application together with the configuration of the FPGA is loaded upon power-up from the SD card or the flash device. What must be done using this method?
 ===== Step by Step Instructions =====

deep