Differences

This shows you the differences between two versions of the page.

--- firstexample:first_example_microzed [2022/11/24 16:21] – ursgraf
+++ firstexample:first_example_microzed [2025/02/18 14:17] (current) – ursgraf
@@ Line 1: / Line 1: @@
 ====== Hello World on the Avnet MicroZed Board ======
-This example will demonstrate how to use the deep compiler to translate a simple Java program and run it on a [[https://wiki.ntb.ch/infoportal/embedded_systems/zynq7000/microzed|MicroZed board]]. This is a simple //Hello World// example. It does not allow to use the FPGA part of the zynq7000. See [[firstexample:first_example_microzed_appdev|Application Development]] or [[firstexample:first_example_microzed_sysdev|System Developer]] for that purpose.
+This example will demonstrate how to use the deep compiler to translate a simple Java program and run it on a [[https://wiki.bu.ost.ch/infoportal/embedded_systems/zynq7000/microzed|MicroZed board]]. This is a simple //Hello World// example. It does not allow to use the FPGA part of the zynq7000. See [[firstexample:first_example_microzed_appdev|Application Development]] or [[firstexample:first_example_microzed_sysdev|System Developer]] for that purpose.
   - Start eclipse, choose a new workspace and open the deep perspective with //Window -> Open Perspective -> Other -> Deep//.
@@ Line 61: / Line 61: @@
 }
 </code>
-  - Plug a [[https://wiki.bu.ost.ch/infoportal/embedded_systems/jtaghs3/start|JTAG-HS3]] adapter into J3 of your board and connect it with your host machine by an USB cable. This will create a USB Serial Converter device on your machine.
+  - Plug a [[https://wiki.ost.ch/display/EDS/Digilent+JTAG-HS3|JTAG-HS3]] adapter into J3 of your board and connect it with your host machine by an USB cable. This will create a USB Serial Converter device on your machine.
   - We use [[openocd:start|OpenOCD]] for downloading and debugging programs. Make sure to have it installed, see [[:installation#Install_Libraries_to_Access_the_Hardware|Download and Installation]]. Next, set the deep preferences so that the OpenOCD command and command options suits your installation, please refer to [[eclipse:perspective#Setting_Deep_Preferences|Setting Deep Preferences]] and [[openocd:starting_openocd|Starting OpenOCD]].
-  - Make sure that you select the //WinUSB// driver for your JTAG-HS3 adapter [[https://wiki.bu.ost.ch/infoportal/embedded_systems/jtaghs3/start]].
+  - Make sure that you select the //WinUSB// driver for your JTAG-HS3 adapter [[https://wiki.ost.ch/display/EDS/Digilent+JTAG-HS3]].
   - Set the jumpers on your MicroZed board as follows \\ {{jtagboot.png?200|}}. \\ This will boot the device from JTAG. The settings of the jumpers will be read only at powerup!
   - Connect your host machine with another USB cable to the MicroZed board on connector J2. This applies power to the target and creates a USB to UART bridge device (COM port).

deep

User Tools

Site Tools

Differences

Page Tools