deep

a Cross Development Platform for Java

User Tools

Site Tools

You are here: start » firstexample » first_example_microzed
firstexample:first_example_microzed

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
firstexample:first_example_microzed [2020/12/09 21:22] – ursgraffirstexample:first_example_microzed [2020/12/09 21:25] – ursgraf
Line 64: Line 64:
   - Make sure that you select the //WinUSB// driver for your adapter [[https://wiki.bu.ost.ch/infoportal/embedded_systems/jtaghs3/start]].   - Make sure that you select the //WinUSB// driver for your adapter [[https://wiki.bu.ost.ch/infoportal/embedded_systems/jtaghs3/start]].
   - Set the jumpers on your MicroZed board as follows \\ {{jtagboot.png?200|}}. \\ This will boot the device from JTAG. The settings of the jumpers will be read only at powerup! Connect your host machine with another USB cable to the MicroZed board (J2). This applies power to the target.   - Set the jumpers on your MicroZed board as follows \\ {{jtagboot.png?200|}}. \\ This will boot the device from JTAG. The settings of the jumpers will be read only at powerup! Connect your host machine with another USB cable to the MicroZed board (J2). This applies power to the target.
-  - Start [[https://deepjava.org/openocd/starting_openocd|OpenOCD]]+  - Start OpenOCD, see [[openocd:starting_openocd|Starting OpenOCD]].
   - Use a terminal program such as ''putty'' or ''realterm'' to open the COM-port on J2 (baudrate = 115200). Alternatively open a terminal program as an eclipse view. Select the appropriate serial port number. Check your host operating settings for this number. If there is no associated serial port yet - make sure, that you have the proper driver installed ([[https://www.silabs.com/community/interface/knowledge-base.entry.html/2016/12/30/downloading_cp210xd-ek07|Downloading CP210x drivers]]).   - Use a terminal program such as ''putty'' or ''realterm'' to open the COM-port on J2 (baudrate = 115200). Alternatively open a terminal program as an eclipse view. Select the appropriate serial port number. Check your host operating settings for this number. If there is no associated serial port yet - make sure, that you have the proper driver installed ([[https://www.silabs.com/community/interface/knowledge-base.entry.html/2016/12/30/downloading_cp210xd-ek07|Downloading CP210x drivers]]).
   - Create a new run configuration by marking the project file //HelloWorld.deep//. Then, right-click on it and choose //Run As -> Deep Application//. \\ {{runas_context.png?280|}} \\ If you already created such a run configuration you can select it from the pulldown menu of the run-button. \\ {{runas_pulldown.png?280|}} \\    - Create a new run configuration by marking the project file //HelloWorld.deep//. Then, right-click on it and choose //Run As -> Deep Application//. \\ {{runas_context.png?280|}} \\ If you already created such a run configuration you can select it from the pulldown menu of the run-button. \\ {{runas_pulldown.png?280|}} \\ 
firstexample/first_example_microzed.txt · Last modified: 2022/12/20 15:53 by ursgraf

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki