This is an old revision of the document!
OpenOCD runs a server to which you can connect
Start OpenOCD as follows:
Navigate to your openocd-0.10.0
directory.
startOpenocdZybo.bat
startOpenocdMicrozed.bat
These commands will With a telnet connection on localhost:4444 the command line interface of OpenOCD can be opened. The Eclipse plugin OpenOCDinterface also uses this port.
The gdb connects over port 3333.
Run OpenOCD with the correct config file: cd /opt/deep/openocd sudo openocd -f microzedboard.cfg or sudo openocd -f digilent_zyboboard.cfg