Differences

This shows you the differences between two versions of the page.

--- openocd:starting_openocd [2020/01/30 13:21] – ursgraf
+++ openocd:starting_openocd [2021/12/28 13:52] – ursgraf
@@ Line 1: / Line 1: @@
 ====== Starting OpenOCD ======
-Navigate to your ''
+OpenOCD runs a server to which you can connect
+  * to the command line interface of OpenOCD with a telnet connection on port 4444
+  * to the GDB server on port 3333
-After startup the shell of OpenOCD is blocked.
+OpenOCD is started automatically when downloading to a Zynq7000 based board. Alternatively you can start OpenOCD as follows:
+==== Windows ====
+Navigate to your ''openocd-0.10.0'' directory.
+  * On the Zybo board start ''startOpenocdZybo.bat''
+  * On the Microzed board start ''startOpenocdMicrozed.bat''
-With a telnet connection on localhost:4444 the command line interface of OpenOCD can be opened. The Eclipse plugin OpenOCD interface also uses this port.
-The gdb connects over port 3333.
+==== Linux ====
+Navigate to your ''openocd-0.10.0'' directory ''cd /opt/deep/openocd''
+  * On the Zybo board start with ''sudo openocd -f digilent_zyboboard.cfg''
+  * On the Microzed board start with ''sudo openocd -f microzedboard.cfg''

deep