This is an old revision of the document!
The application together with the configuration of the FPGA is loaded upon power-up from the flash device. What must be done using this method?
cmd /C C:\Xilinx\SDK\2019.1\bin\program_flash -f M:\EUser\JCC\org.deepjava.trglib\rsc\BOOTflink2.mcs -offset 0 -flash_type qspi-x4-single -fsbl D:\Vivado\Booting\Booting.sdk\FSBL\Debug\FSBL.elf -cable type xilinx_tcf url TCP:127.0.0.1:3121