deep

a Cross Development Platform for Java

User Tools

Site Tools


first_example

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
first_example [2019/11/06 14:20] – [Example on mpc5200] ursgraffirst_example [2019/11/06 14:22] – [Example on ZYBO board] ursgraf
Line 120: Line 120:
 </code> </code>
  
-16. //Run// will compile, link and create the image file. Use an external debugging device such as an [[http://wiki.ntb.ch/infoportal/embedded_systems/abatron_bdi/start|Abatron BDI]] to download the program. +16. //Run// will compile, link and download the image file. For downloading and debugging [[openocd:start|OpenOCD]] will be usedMake sure to have it installed
- +
-If the boot loader //uBoot// is present on the board, it will start up and configure the memory and clocksNow, it's possible to download a program without using an Abatron device. For this, you have to choose in step 4 the target configuration //Phytec PhiCORE-MPC5200uBoot//This configuration is valid for the //tiny// and the //io// board.   +
-Connect a terminal program on PSC3 with 115200, no parity, 8 bit. Also connect the Ethernet of the board to your local server, which must have a TFTP server running. Run the following command: <code>tftp 0x400000 myDir/test.bin bin</code> +
-Please make sure that your image file resides in the right directory on your TFTP server. Finally start your program with <code>go 0x400100</code> +
 ===== Example on mpc5200 ===== ===== Example on mpc5200 =====
 If you use a mpc5200 platform the following steps have to be altered: If you use a mpc5200 platform the following steps have to be altered: