deep

a Cross Development Platform for Java

User Tools

Site Tools

You are here: start » download
download

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Last revisionBoth sides next revision
download [2020/12/09 11:59] – [Install Libraries to Access the Hardware] ursgrafdownload [2020/12/09 12:05] – [Install Libraries to Access the Hardware] ursgraf
Line 41: Line 41:
 ==== Using a Zynq7000 Based Board ==== ==== Using a Zynq7000 Based Board ====
 If you use an ARM based target, i.e. the Zybo or MicroZed Board with a Zynq7000 processor, install the [[..:..:openocd:start | OpenOCD toolchain]]. If you use an ARM based target, i.e. the Zybo or MicroZed Board with a Zynq7000 processor, install the [[..:..:openocd:start | OpenOCD toolchain]].
 +=== Windows ===
 +
 +=== Linux===
 +  * Install OpenOCD, it is probably available through your distribution's package manager. E.g. ''sudo apt install openocd''
 +  * Download {{ :openocd:ostboards.rar |}} and unpack it to suitable place, such as ''/opt/deep/openocd''
 +    * Hint: You can use ''7z'' (package ''p7zip'') to extract ''.rar'' files on linux: ''7z e ostboards.rar -o/opt/deep/openocd/''
 +  * Run OpenOCD with the correct config file:
 +    - ''cd /opt/deep/openocd''
 +    - ''sudo openocd -f microzedboard.cfg'' or ''sudo openocd -f digilent_zyboboard.cfg''
 +
 ==== Using a MPC555 Board ==== ==== Using a MPC555 Board ====
 If you want to use deep with our [[http://wiki.ntb.ch/infoportal/embedded_systems/mpc555/headerboard/start|MPC555]] and the [[http://wiki.ntb.ch/infoportal/embedded_systems/mpc555/usb-bdi|USB-BDI]] If you want to use deep with our [[http://wiki.ntb.ch/infoportal/embedded_systems/mpc555/headerboard/start|MPC555]] and the [[http://wiki.ntb.ch/infoportal/embedded_systems/mpc555/usb-bdi|USB-BDI]]
Line 49: Line 59:
     - Add the plugin by checking ''LibusbJava plugin for eclipse'' from category „NTB“     - Add the plugin by checking ''LibusbJava plugin for eclipse'' from category „NTB“
   * Install the plugin ''mpc555UsbBdi'' from the same update site and follow the instructions of the plugin installer   * Install the plugin ''mpc555UsbBdi'' from the same update site and follow the instructions of the plugin installer
-  * Alternatively to step 1 and 2, on Windows, you can use our [[https://wiki.ntb.ch/infoportal/software/ntb_windows_driver_package/start|NTB Windows Driver Package]] +  * On Windows, alternatively to step 1 and 2, you can use our [[https://wiki.ntb.ch/infoportal/software/ntb_windows_driver_package/start|NTB Windows Driver Package]] 
-  * When using a [[https://wiki.ntb.ch/infoportal/embedded_systems/abatron_bdi/start|Abatron BDI2000/BDI3000]] you must install the Abatron debugger plugin.+ 
 +==== Using a MPC5200 Board ==== 
 +When using a [[https://wiki.ntb.ch/infoportal/embedded_systems/abatron_bdi/start|Abatron BDI2000/BDI3000]] you must install the Abatron debugger plugin.

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki