Differences

This shows you the differences between two versions of the page.

--- download [2020/12/09 11:18] – [Install Libraries to Access the Hardware] ursgraf
+++ download [2020/12/09 12:05] – [Install Libraries to Access the Hardware] ursgraf
@@ Line 39: / Line 39: @@
 ===== Install Libraries to Access the Hardware =====
+==== Using a Zynq7000 Based Board ====
+If you use an ARM based target, i.e. the Zybo or MicroZed Board with a Zynq7000 processor, install the [[..:..:openocd:start | OpenOCD toolchain]].
+=== Windows ===
-  * If you use an ARM based target, i.e. the Zybo or MicroZed Board with a Zynq7000 processor, install the [[..:..:openocd:start | OpenOCD toolchain]].
+=== Linux===
-  * If you want to use deep with our [[http://wiki.ntb.ch/infoportal/embedded_systems/mpc555/headerboard/start|MPC555]] and the [[http://wiki.ntb.ch/infoportal/embedded_systems/mpc555/usb-bdi|USB-BDI]]
+  * Install OpenOCD, it is probably available through your distribution's package manager. E.g. ''sudo apt install openocd''
-    - Install the [[https://libusb-java.ch/installation/start|LibusbJava]]. For Java 9 and later, make sure that you install the necessary plugin as follows:
+  * Download {{ :openocd:ostboards.rar |}} and unpack it to suitable place, such as ''/opt/deep/openocd''
-      - Start the Eclipse IDE (eclipse.exe)
+    * Hint: You can use ''7z'' (package ''p7zip'') to extract ''.rar'' files on linux: ''7z e ostboards.rar -o/opt/deep/openocd/''
-      - Open the plugin installation dialog: Help → Install New Software…
+  * Run OpenOCD with the correct config file:
-      - Add a new plugin source: Add… → Name: NTB Plugins, Location: http://update.deepjava.org/eclipse/ → OK
+    - ''cd /opt/deep/openocd''
-      - Add the plugin by checking ''LibusbJava plugin for eclipse'' from category „NTB“
+    - ''sudo openocd -f microzedboard.cfg'' or ''sudo openocd -f digilent_zyboboard.cfg''
-    - Install the plugin ''mpc555UsbBdi'' from the same update site and follow the instructions of the plugin installer
-    - Alternatively to step 1 and 2, on Windows, you can use our [[https://wiki.ntb.ch/infoportal/software/ntb_windows_driver_package/start|NTB Windows Driver Package]]
+==== Using a MPC555 Board ====
-  * When using a [[https://wiki.ntb.ch/infoportal/embedded_systems/abatron_bdi/start|Abatron BDI2000/BDI3000]] you must install the Abatron debugger plugin.
+If you want to use deep with our [[http://wiki.ntb.ch/infoportal/embedded_systems/mpc555/headerboard/start|MPC555]] and the [[http://wiki.ntb.ch/infoportal/embedded_systems/mpc555/usb-bdi|USB-BDI]]
+  * Install the [[https://libusb-java.ch/installation/start|LibusbJava]]. For Java 9 and later, make sure that you install the necessary plugin as follows:
+    - Start the Eclipse IDE (eclipse.exe)
+    - Open the plugin installation dialog: Help → Install New Software…
+    - Add a new plugin source: Add… → Name: NTB Plugins, Location: http://update.deepjava.org/eclipse/ → OK
+    - Add the plugin by checking ''LibusbJava plugin for eclipse'' from category „NTB“
+  * Install the plugin ''mpc555UsbBdi'' from the same update site and follow the instructions of the plugin installer
+  * On Windows, alternatively to step 1 and 2, you can use our [[https://wiki.ntb.ch/infoportal/software/ntb_windows_driver_package/start|NTB Windows Driver Package]]
+==== Using a MPC5200 Board ====
+When using a [[https://wiki.ntb.ch/infoportal/embedded_systems/abatron_bdi/start|Abatron BDI2000/BDI3000]] you must install the Abatron debugger plugin.

deep

User Tools

Site Tools

Differences

Page Tools