Starting OpenOCD

OpenOCD runs a server to which you can connect

• to the command line interface of OpenOCD with a telnet connection on port 4444
• to the GDB server on port 3333

OpenOCD is started automatically when downloading to a Zynq7000 based board. Alternatively you can start OpenOCD as follows:

Navigate to your openocd-0.10.0 directory.

• On the Zybo board start startOpenocdZybo.bat
• On the Microzed board start startOpenocdMicrozed.bat

Navigate to your openocd-0.10.0 directory cd /opt/deep/openocd

• On the Zybo board start with sudo openocd -f digilent_zyboboard.cfg
• On the Microzed board start with sudo openocd -f microzedboard.cfg

Alternatively, you could start openOCD anywhere and indicate the path to search for config files and scripts with

• sudo openocd -s /home/…/openocd -f digilent_zyboboard.cfg
• sudo openocd -s /home/…/openocd -f microzedboard.cfg