Download and Installation

• PC running Linux, Mac OS X or Windows
• Java Developer Kit 11 or newer
• Eclipse 3.8 or newer
• Microcontroller board (MPC555 / MPC5200B / MicroZed / Zybo / Colibri)

1. Ensure that you've installed an up-to-date JDK.
   • Download the JDK from the Oracle website.
   • Install it by using the setup assistant
2. Install Eclipse IDE for Java Developers.
   • Get the newest version of Eclipse for Java Developers.
   • Unzip it into C:\Program Files\eclipse or C:\Programme\eclipse, respectively.

1. Ensure that you have installed an up-to-date JDK.
   • On ubuntu/debian based systems you can run sudo apt install default-jdk
2. Install Eclipse for Java Developers:
   • Download it from here
   • Extract it to a suitable place, such as /opt/deep/eclipse/
     1. mkdir -p /opt/deep/eclipse
     2. tar -C /opt/deep/eclipse -xvf eclipse-java-2020-09-R-linux-gtk-x86_64.tar.gz

1. Install the deep Eclipse plugin from our Update Site.
   1. Start the Eclipse IDE (eclipse.exe)
   2. Open the plugin installation dialog: Help → Install New Software…
   3. Add a new plugin source: Add… → Name: Deep, Location: http://update.deepjava.org/eclipse/ → OK
   4. Add the plugin by checking deep Plugin for Eclipse from category „Deep“

1. Install the deep runtime library by extracting the newest ZIP archive from https://update.deepjava.org/runtime-library/ to C:\Programm Data\deep\trglib (Windows), /opt/deep/lib (Linux) or any other location.

If you use an ARM based target, i.e. the Zybo or MicroZed Board with a Zynq7000 processor, install the OpenOCD toolchain.

1. Install OpenOCDInterface plugin in eclipse from our Update Site.
   1. Start the Eclipse IDE (eclipse.exe)
   2. Open the plugin installation dialog: Help → Install New Software…
   3. Add a new plugin source: Add… → Name: Deep, Location: http://update.deepjava.org/eclipse/ → OK
   4. Add the plugin by checking openOCD Plugin for Eclipse from category „Deep“
2. Install OpenOCD
   • Windows
     1. In order to use OpenOCD, the correct USB drivers must be installed. We suggest using USB driver tool for this purpose. This tool is available solely for Windows. Download the USB driver tool and extract it. We will later use it to load the correct driver.
     2. Install OpenOCD
        • Either compile OpenOCD from the source code
        • Or download the precompiled binaries for Windows (preferred method)
          1. Extract the archive to your computer
          2. The executable binary is located under: openocd-0.10.0/bin-x64/
          3. The user manual is located under: openocd-0.10.0/
          4. Get ostboards.zip and unpack it into your openocd-0.10.0 directory
        • Alternatively, you can download the precompiled binaries for Windows together with the necessary files for the MicroZed and the Zybo boards here.
   • Linux
     1. Install OpenOCD, it is probably available through your distribution's package manager. E.g. sudo apt install openocd
     2. Download ostboards.zip and unpack it to suitable place, such as /opt/deep/openocd

If you want to use deep with our MPC555 and the USB-BDI

• Install the LibusbJava. For Java 9 and later, make sure that you install the necessary plugin as follows:
  1. Start the Eclipse IDE (eclipse.exe)
  2. Open the plugin installation dialog: Help → Install New Software…
  3. Add a new plugin source: Add… → Name: Deep, Location: http://update.deepjava.org/eclipse/ → OK
  4. Add the plugin by checking LibusbJava plugin for eclipse from category „Deep“
• Install the plugin mpc555UsbBdi from the same update site and follow the instructions of the plugin installer
• On Windows, alternatively to the steps above, you can use our INF Windows Driver Package

When using a Abatron BDI2000/BDI3000 you must install the Abatron debugger plugin. Check on https://github.com/deepjava/abatronInterface.